PET sheet purchasing
PET sheet
PET is polyethylene terephthalate, a polyester material. If you need PET sheet, please tell us the intended use, thickness, width, and quantity; samples or drawings can be submitted together.
Inquiry
When inquiring about PET sheet, first tell us the intended use and quantity
If you have thickness, width, roll diameter or sheet length, color, or other requirements, please include them as well; mark items that are not yet known as “pending confirmation”.
Specifications and documents
The approved specifications and documents below are published in Chinese as currently reviewed.
公开规格信息
- 可供厚度：0.13–1.5 mm
- 可供幅宽：400–800 mm
- PET 边角料实行自循环回用，不对外采购回收料。
- 具体牌号、颜色与表面要求在确认需求后核对。
Inquiry checklist
Request preparation
- Material: you may enter PET sheet, or state honestly that the material is not yet decided.
- Intended use and quantity.
- Thickness, width, and roll diameter or sheet length.
- Color, surface requirements, destination, and preferred date.
Further reading
Two references often used when selecting a material
These two pages give a judgment order and a checklist of terms; they do not make the decision for you. Confirm the specific material against samples and reports.
- How to choose among four sheet typesProperty boundaries, quoting terms, and three common pitfalls for PS, PVC, PET, and PPView the comparison →
- Flocked sheet selectionPre-flock / post-flock thickness terms, substrate choice, flock surface, and acceptance descriptionsView the selection notes →
These references are currently published in Chinese.
Selection and sampling
Confirm item by item, from intended use to sample
- 01Describe the intended use
Explain the downstream processing, packaged object, and use context.
- 02Check the parameters
Organize dimensions, form, color, surface, and quantity conditions.
- 03Confirm with a sample
When needed, use a sample to check appearance and downstream processing performance.
- 04Agree on acceptance
In later discussions, specify batch documents and acceptance items.
Information needed for a quote
Please provide the material, intended use, quantity, dimensions, color, surface requirements, delivery location, and preferred reply time. You may also state that the material is not yet decided.
Go to request submissionCommon questions
Can I inquire before the material is decided?
Yes. First write the intended use, quantity, and known dimensions, and select “undecided” in the material field. Suitability is then confirmed against samples and processing conditions.
When inquiring about PET sheet, what should I provide?
First write the intended use, estimated quantity, and a contact method; also send thickness, width, roll diameter, sheet length, or drawings and photos when you have them.
If a page does not list a property, can I order as if that function is included?
No. Please send the required properties and use conditions, and confirm them against the corresponding material reports or samples before proceeding.
Do I need a sample?
When appearance, hand feel, or downstream processing matters, confirm with a sample first. Inquiry information and samples can be prepared together.
APET、PETG、CPET 三者怎么区分？
APET 偏透明与常规成型；PETG 在 APET 基础上改善韧性与热封表现；CPET 为结晶型，用于需要耐受较高温度的场景。三者成型条件不同，需结合设备确认。
PET 比 PS 贵多少？
没有脱离条件的固定差价。实际报价绑定材料牌号、厚度、幅宽、颜色、表面要求、数量、税运口径与交付时间，需按具体条件核算，可通过询价表单提交后确认。
你们的 PET 片材用回收料吗？
本厂 PET 生产的边角料实行自循环回用，不对外采购回收料。进入生产的原料来源可控，回用比例与批次可追溯；具体回用比例与牌号相关的技术口径，可在确认需求时提供。
Evidence references
- EVD-652A396754CC: PET 片材公开规格、回收料自循环口径与选型问答，来源为负责人确认。
Review date: 2026-09-18