Fabric-backed sheet purchasing
Fabric-backed sheet
Fabric-backed sheet bonds finished fabric to a substrate and retains the fabric structure and texture. When inquiring, please note the substrate, fabric type, color, and subsequent processing method; if you have a physical sample, you can submit a photo.
Fabric surface and substrate
For fabric-backed sheet, review the fabric surface first, then confirm the substrate
Please provide the fabric type, color, roll or sheet form, dimensions, quantity, and subsequent processing method. Samples, images, or drawings can be sent together.
The specific combination of fabric surface and substrate needs to be confirmed against a sample and reviewed documents.
Submit a fabric-backed sheet requestInquiry
When inquiring about Fabric-backed sheet, first tell us the intended use and quantity
If you have thickness, width, roll diameter or sheet length, color, or other requirements, please include them as well; mark items that are not yet known as “pending confirmation”.
Specifications and documents
The approved specifications and documents below are published in Chinese as currently reviewed.
公开规格信息
- 可供厚度：0.13–1.5 mm
- 可供幅宽：400–800 mm
- 具体基材、布面类型与颜色在确认需求后核对。
Inquiry checklist
Request preparation
- Material: you may enter Fabric-backed sheet, or state honestly that the material is not yet decided.
- Intended use and quantity.
- Thickness, width, and roll diameter or sheet length.
- Color, surface requirements, destination, and preferred date.
Further reading
Two references often used when selecting a material
These two pages give a judgment order and a checklist of terms; they do not make the decision for you. Confirm the specific material against samples and reports.
- How to choose among four sheet typesProperty boundaries, quoting terms, and three common pitfalls for PS, PVC, PET, and PPView the comparison →
- Flocked sheet selectionPre-flock / post-flock thickness terms, substrate choice, flock surface, and acceptance descriptionsView the selection notes →
These references are currently published in Chinese.
Selection and sampling
Confirm item by item, from intended use to sample
- 01Describe the intended use
Explain the downstream processing, packaged object, and use context.
- 02Check the parameters
Organize dimensions, form, color, surface, and quantity conditions.
- 03Confirm with a sample
When needed, use a sample to check appearance and downstream processing performance.
- 04Agree on acceptance
In later discussions, specify batch documents and acceptance items.
Information needed for a quote
Please provide the material, intended use, quantity, dimensions, color, surface requirements, delivery location, and preferred reply time. You may also state that the material is not yet decided.
Go to request submissionCommon questions
Can I inquire before the material is decided?
Yes. First write the intended use, quantity, and known dimensions, and select “undecided” in the material field. Suitability is then confirmed against samples and processing conditions.
When inquiring about Fabric-backed sheet, what should I provide?
First write the intended use, estimated quantity, and a contact method; also send thickness, width, roll diameter, sheet length, or drawings and photos when you have them.
If a page does not list a property, can I order as if that function is included?
No. Please send the required properties and use conditions, and confirm them against the corresponding material reports or samples before proceeding.
Do I need a sample?
When appearance, hand feel, or downstream processing matters, confirm with a sample first. Inquiry information and samples can be prepared together.
植布片材和植绒片材有什么区别？
植绒是在基材表面胶层上固定短纤维形成绒面；植布是把成品布层与基材复合，保留布料本身的组织和纹理。两者是不同的表面加工类别，不能只凭外观或名称互相替代；选型时应分别核对基材、绒毛或基布、胶层和后续成型条件。
植布片材怎么描述需求？
需明确四项——基材种类（PS / PVC / PET / 纸板等）、布面类型与颜色、片材形态（卷材还是片材、厚度与幅宽）、后续加工方式（是否吸塑成型、是否需要模切）。四项中任一未定可标注待确认。
植布片材表面层的耐久性怎么样？
耐久性取决于基材、基布或绒毛、胶层、复合工艺和使用条件，不能仅凭“植布”或“植绒”判断耐水、耐摩擦表现。采购时先说明接触介质、潮湿条件、摩擦方式和后续成型要求，再用实物样品按双方约定的测试条件核对起毛、掉毛或脱层情况。
Evidence references
- EVD-787DC5AF9833: 植布片材公开规格与选型问答，来源为负责人确认。
Review date: 2026-11-12